Automatic Pump controllers are built for a quiet running operation, Non return valve built-in, pressure gauge, pressure switch and electronic control with dry running function integrated with manual reset button.
It is assembled on a pump for automatic water supply.
When the taps are opened it starts the electric pump automatically after a decrease in pressure. When the taps are closed the fluid flow interrupts at the maximum pressure level of the electric pump and stops the electric pump. If the pump runs without water, the controller off the pump and prevents water hammer.
Technical Specifications:
- Rated Voltage: 1~220 / 230 / 240V
- Frequency: 50 / 60 Hz
- Max current / Max power: 10A / 1.1 KW
- Starting pressure setting: 1.5 bar
- Max working pressure: 10Bar
- Protecting rating: IP65
- Max Working Temperature: 60° C
Specifications:
- No Noise, Complete silent.
- Built in reset button
- Automatic start and stop of pump
- Protection against dry running
- Over heat protection
- Examine the water automatically
- Forced start
Automatic pump controller is successfully tested up to 50,000 cycles which is more than 3 years of life in normal working conditions.